Honeywell Voyager 1202G-BF User Manual page 160

Single-line laser bar code scanner
Hide thumbs Also See for Voyager 1202G-BF:
Table of Contents

Advertisement

When Check Character is set to Validate Type 10/11, but Don't Transmit, the unit will only read MSI bar codes printed
with the specified type check character(s), but will not transmit the check character(s) with the scanned data.
* Validate Type 10, but Don't
Transmit
Validate 2 Type 10 Characters,
but Don't Transmit
Validate Type 11 then Type 10
Character, but Don't Transmit
Disable MSI Check Characters
MSI Redundancy
If you are encountering errors when reading MSI bar codes, you may want to adjust the redundancy count. Redundancy
adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan the MSI
Redundancy bar code below, then scan a redundancy count between 0 and 10 on the
cover of this manual. Then scan the
8 - 44
Save
bar code. Default = 0.
MSI Redundancy
Validate Type 10 and Transmit
Validate 2 Type 10 Characters
and Transmit
Validate Type 11 then
Type 10 Character and Transmit
Programming Chart
inside the back

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voyager 1200gVoyager 1202g

Table of Contents