Scanner Led Sequences And Meaning; Base/Access Point Led Sequences And Meaning - Honeywell 1900GSR-2 User Manual

Scanner LED Sequences and Meaning

LED Indication
Normal Operation
Red Flash
Green Flash
Red, blinking
Menu Operation
Green Flash
Red, blinking

Base/Access Point LED Sequences and Meaning

The base contains a red LED and the Access Point has a blue LED that
indicate the status of the unit and verifies its communication with the host
system. The base also has a green LED that indicates scanner battery
charge condition.
Red or Blue LED - Host Communication
Communication Condition
USB suspend
Power on, system idle
Receiving data
(base only, does not apply to Access Point)
Charge Condition
Battery not detected or charge
suspended
Pre-charge and charging
Charge complete
Charge Error
Beeper Indication
None
1 beep
Razz or error tone
2 beeps
Razz or error tone
Red or Blue LED
Off
On continuously
Short blinks in multiple pulses. Occurs
while transferring data to/from the RF
module or the Host port.
Green LED - Scanner Battery
Green LED
Off
Slow flash, 1 second on, 1 second off
On continuously
Fast flash, 300 mSec on, 300 mSec off
Cause
Battery low
Successful
communication or linking
Failed communication
Successful menu change
Unsuccessful menu
change
3 - 7