Radio Operation - Hyundai RAC 281 PLL Instruction Manual

Hide thumbs Also See for RAC 281 PLL:
Table of Contents

Advertisement

Available languages

Available languages

RADIO OPERATION:

Press MODE button to enter Radio Mode
■ default at FM87.5 when first use
■ Last radio frequency memory
Press SCAN-/SCAN+ once for radio frequency selection.
Press & hold for auto radio station searching.
Once the radio station been selected. Press & hold MEMO button to enter the Preset Radio
Station Mode. Then press SCAN-/SCAN+ to select the desire preset station number.
Then press MEMO again to confirm.
Repeat the above procedures to store more radio stations (maximum 10 preset radio
stations).
Listening to the radio by preset station
In Radio Mode, press the M+ button to select the desired preset radio station. Then press M+
button again for the next preset station. Total 10 radio preset station available, keep press
the M+ button for the preset radio station cycle.
SNOOZE/LIGHT FUNCTION:
During the wakeup time, press the SNOOZE/LIGHT button once to temporarily turn off
the alarm. After approximately 9 minutes the alarm will sound again. The cycle will repeat
when the SNOOZE / LIGHT button is pressed again. Alarm max last for 1 hour
Note:
When in Clock Mode:
Press the SNOOZE / LIGHT button, the panel backlight and projection clock will turn on,
and will turn off automatically after 60 seconds.
Press and hold SNOOZE/LIGHT for backlight and projection clock always ON, then press
and hold again for back to normal
When in Radio Mode:
LCD Backlight already ON. Press once for turning on projection clock then it will turn
off automatically after 60 seconds.
LCD Backlight already ON. Press and hold SNOOZE/LIGHT for projection clock always ON,
then press and hold again for back to normal
Volume Setting:
Press VOL+ or VOL- to set the sound volume up or down.
Sleep Setting:
When in Radio mode, press the SLEEP button to turn on the sleep timer. Press the SLEEP
button again to set the desire sleep time. Timer sequence: 90>80>70>60>50>40>30>20>10>
OFF>
Projector Rotate & Focus (At the back of projector):
Rotate:
Scroll for setting the best projection clock viewing angle.
Focus:
Scroll for setting the best projection clock image.
EN - 20

Advertisement

Table of Contents
loading

Table of Contents