Function Key; Clock Operation - Hyundai RAC 281 PLL Instruction Manual

FUNCTION KEY:

• AL1:
• AL2:
• MODE:
• SCAN -:
• SCAN +:
• SET:
• MEMO:
• SLEEP:
• VOL +/-:
• SNOOZE:
• LIGHT:

CLOCK OPERATION:

Time Setting
• Press MODE until you enter the Clock Display Mode
(or it will be in Clock Display Mode when you first connect with Electricity)
• Press & hold the SET button to enter Time Setting Mode
• Press SCAN-/SCAN+ to set the desire time, press the SET button to confirm and for next
setting
Clock Setting sequence: 12/24 Hour > Hour > Minute > Year > Month > Day
Alarm Time Setting
• In Clock Display Mode
• Press AL1/AL2 button for checking alarm status
• Then press & hold AL1/AL2 to enter alarm clock setting mode. Press SCAN+/SCAN- to select
the desire time, then press AL1/AL2 to confirm and for next setting. The sequence: Hour >
Minute > Weekday/Weekday/Everyday alarm setting > Sound sources (Radio or Buzzer) >
preset radio station number (Radio only)
(Remark: Radio preset station must be set before using the "wake up by Radio" function.
Otherwise, alarm will only wake up to the default station at FM 87.5MHz)
• Alarm last for 1 hour
• Alarm only available to stop by pressing MODE button
• Alarm restart every 9 minutes after each press of SNOOZE
Press for checking Alarm1 status then press & hold for Alarm1
setting
Press & Hold for Alarm1 ON/OFF
Press for checking Alarm2 status then press & hold for Alarm2
setting
Press & Hold for Alarm2 ON/OFF
Press once for Radio ON
Press & Hold for Radio OFF
For Alarm Off (Alarm Mode)
(Radio) Press once Radio frequency down,
Press & hold for radio station searching
(Radio) Press once for Radio frequency up,
Press & hold for radio station searching
(Clock) Press & Hold For clock setting
(Radio) For setting the preset radio station
Press for sleep timer setup (90>60>30>15>0)
Volume level UP/DOWN
Snooze function when in alarm mode (Each press for repeating
alarm every 9 minutes, last for 1 hour)
Light function when in normal situation
(Press once for LCD backlight ON for 60 seconds)
(Press & hold for LCD backlight always ON, then press & hold
again for return to normal situation)
EN - 19
EN