Precautions - Icom IC-M603 Instruction Manual

PRECAUTIONS

RWARNING! NEVER
AC outlet. This may pose a fire hazard or result in an electric
shock.
RWARNING! NEVER
power source of more than 16 V DC or use reverse polarity.
This will ruin the transceiver.
RWARNING! NEVER
the DC plug and fuse holder. If an incorrect connection is
made after cutting, the transceiver may be damaged.
CAUTION: NEVER
operation of the vessel may be hindered or where it could
cause bodily injury.
KEEP
the transceiver and microphone at least 1 m away
from the vessel's magnetic navigation compass.
DO NOT
use or place the transceiver in areas with tem-
peratures below –20°C or above +60°C or, in areas subject
to direct sunlight, such as the dashboard.
v
connect the transceiver to an
connect the transceiver to a
cut the DC power cable between
place the transceiver where normal
DO NOT
use chemical agents such as benzine or alcohol
when cleaning, as they may damage the transceiver sur-
faces. If the transceiver becomes dusty or dirty, wipe it clean
with a soft, dry cloth.
BE CAREFUL!
The transceiver rear panel will become
hot when operating continuously for long periods.
Place the transceiver in a secure place to avoid inadvertent
use by children.
BE CAREFUL!
The transceiver and the optional HM-
162E* ™ employ waterproof construction,
commandmiciii
which corresponds to IPX7. However, once the transceiver
or microphone has been dropped, waterproof protection
cannot be guaranteed because of possible damage to the
transceiver's or microphone's case, or the waterproof seal.
* Equivalent to IPX8
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by Icom.