Channel Comments; Aquaquake Water Draining Function - Icom IC-M603 Instruction Manual

Marine
Hide thumbs Also See for IC-M603:
Table of Contents

Advertisement

■ Channel comments

Each channel can be labeled with a unique alphanumeric ID
of up to 10 characters each.
Capital letters, small letters, 0 to 9, some symbols (- .-/)
and space can be used.
q Select the desired channel.
• Cancel Dualwatch, Tri-watch or Scan in advance.
w While pushing and holding [H/L], push [16•C] to edit the
channel comment.
• A cursor and the first charac-
ter start blinking alternately.
e Push the appropriate key several times to enter the de-
sired character.
• See the table to the right for available characters.
• Rotate [SELECTOR] or push [Y]/[Z] on the microphone to
move the cursor.
• Push [CE] to clear the channel comment.
• Push [CLR] to cancel and exit the condition.
r Push [ENT] to input and set the comment.
• The cursor and the character stop blinking.
t Repeat steps q to r to program other channel com-
ments, if desired.
25W
INT
TAG
34°34.506N
123°23.236W
UTC 12:00PLEASURE__
• Available characters
KEY
CHARACTERS
1 Q Z q z (space)
2 A B C a b c
3 D E F d e f
4 G H I g h i
5 J K L j k l

■ AquaQuake water draining function

The IC-M603 uses a new technology to clear water away
from the speaker grill: AquaQuake. AquaQuake helps drain
water away from the speaker housing (water that might
otherwise muffle the sound coming from the speaker). The
IC-M603 emits a vibrating noise when this function is being
used.
➥ While pushing and holding [H/L], turn power ON.
• A low beep tone sounds while [H/L] key is pushed and held to
drain water, regardless of [VOL] control setting.
• The transceiver never accepts a key operation while the
AquaQuake function is activated.
While pushing and holding [PTT] on the optional HM-162E,
turn power ON to clear water away from the HM-162E.
BASIC OPERATION
KEY
CHARACTERS
6 M N O m n o
7 P R S p r s
8 T U V t u v
9 W X Y w x y
0 - / .
3
3
11

Advertisement

Table of Contents
loading

Table of Contents