Table of Contents
Advertisement
Removable Devices
For options on this menu, use the up or down arrow keys to select a device, then press the <+> or
<-> keys to move the device higher or lower in the boot priority list.
Option
1. Legacy Floppy Drive
Exit Menu
You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys; then press <Enter> to execute the option. Pressing <Esc> does not exit this menu.
You must select one of the items from the menu or menu bar to exit.
Choices
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Load Custom Defaults
Save Custom Defaults
Discard Changes
Save Changes
Using the System Setup Utility
The SSU provides a graphical user interface (GUI) over an extensible framework for server
configuration. For the ISP2150 system, the SSU framework supports the following functions and
capabilities:
•
assigns resources to baseboard devices and add-in cards prior to loading the operating
system (OS)
•
allows you to specify boot device order and system security options
•
permits viewing and clearing of the system's system event log
•
allows troubleshooting of the server when the OS is not operational
•
provides a system level view of the server's I/O devices
Configuration Software and Utilities
Description
Refers to the onboard 3.5" floppy drive.
Removable IDE media may also show up here if the removable media
was formatted in floppy emulation.
Description
Exits after writing all modified Setup item values to NVRAM.
Exits leaving NVRAM unmodified.
Loads values of all Setup items from previously saved custom defaults.
Loads default values for all Setup items.
Saves present Setup values to custom defaults.
Reads previous values of all Setup items from NVRAM.
Writes all Setup item values to NVRAM.
67
Advertisement
Table of Contents
