Mains Connection; Battery Operation - KERN EOB_F Instruction Manual

7.3 Mains connection

On the bottom side of the display unit or of the platform there is located the mains
connection. Two mains adapters are delivered.
Power is supplied via the external mains adapter. The stated voltage value must be
the same as the local voltage. Only use original KERN mains adapters. Using other
makes requires consent by KERN.
Fig. Mains connection platform 314,5 x 304,5 mm:
Connection of mains
adapter
Fig. Mains connection platform 550 x 550 mm:

7.4 Battery operation

On the rear side of the display unit – the platform (see Fig) remove the battery cover
and connect 6 x 1.5V mignon cells. Reinsert the battery cover.
In order to save the battery, the balance switches automatically off after 3 minutes
without weighing. Further shutdown times can be set in the Menu (Function
"A.OFF"), see chap. 10.
If the batteries are exhausted, the battery symbol will appear (see chap.3). Switch-off
balance and replace batteries at once.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.
12
Connection of mains adapter
EOB_F-BA-e-1310