To remove slot covers 5 and 6, push down on the latch, rotate the latch down, and then remove the
o
cover.
Expansion boards
Half-length expansion board
To remove the component:
Power down the server (on page 26).
1.
Extend the server from the rack (on page 27).
2.
Remove the access panel
3.
Disconnect any external cables that are connected to the expansion board.
4.
Remove the PCI riser cage
5.
Disconnect any internal cables that are connected to the expansion board.
6.
("Access
panel" on page 31).
("PCI riser
cage" on page 33).
Removal and replacement procedures 57