Disconnect the Smart Storage Battery cable.
5.
Remove the Smart Storage Battery.
6.
To replace the component, reverse the removal procedure.
Expansion boards
Expansion boards supported with this server include any board installed in the PCIe riser board assembly,
controllers, and the Express Bay bridge card.
To remove the component:
Power down the server (on page 16).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 17).
o
Removal and replacement procedures 51