Table 2.1: COM Connector Pin Assignments
Pin
1
2
3
4
5
6
7
8
9
2.2.3
USB 1~2 Connectors
ARK-DS262 provides two USB interface connectors, which gives complete Plug &
Play and hot swapping capability for up to 127 external devices. The USB interface is
compliant with USB UHCI, Rev. 3.0. The USB interface supports Plug and Play,
which enables you to connect or disconnect a device without turning off the system.
Table 2.2: USB 1~2 Port Pin Assignments
Pin
1
2
3
4
2.2.4
Ethernet Connector (LAN)
ARK-DS262 provides one RJ-45 LAN interface connector, fully compliant with
IEEE802.3u 10/100/1000 Base-T CSMA/CD standards. The Ethernet port provides a
standard RJ-45 jack connector with LED indicators to show its Active/Link status and
speed status.
Signal Name
DCD
RxD
TxD
DTR
GND
DSR
RTS
CTS
RI
Figure 2.4 USB 1~2 Connectors
Signal Name
VCC
USB Data-
USB Data+
GND
Figure 2.5 Ethernet Connector
7
ARK-DS262 User Manual