Table of Contents
Advertisement
2.2 ARK-3382 front metal face plate external I/O con-
nectors
2.2.1 Power ON/OFF Button
The ARK-3382 comes with a Power On/Off button, that supports the dual
function of Soft Power -On/Off (Instant off or Delay 4 Second), and Sus-
pend.
2.2.2 LED Indicators
There are two LEDs on the ARK-3382 front metal face plate for indicat-
ing system status: PWR LED is for power status and flashes in Green;
HDD LED is for the hard disk and compact flash disk status, which
flashes in Red.
2.2.3 LVDS Connector
The ARK-3382 comes with a D-Sub 26-pin connector that carries LVDS
signal output, and can directly connect to an LVDS LCD Display via
external cable.
The system also provides a JP6jumper on the internal PCM-9380 or
PCM-9386 motherboard for selecting the LCD signal power of 5V or
3.3V, please refer to section 3.4 of Chapter 3 for the jumper table of JP6,
and Chapter 6 of "Full Disassembly Procedure to set it up. The default
setting of JP6 is 5V.
Figure 2.3: LVDS Connector
9
Chapter 2
Advertisement
Table of Contents
