Status List - Sanyo VSP-8000 Instruction Manual

STATUS LIST

If the STATUS LIST button is pressed again, the status list will disappear and the original screen will return.
STATUS lamp operation
1
If the status of a timelapse VCR
changes, the STATUS lamp will
flash for five seconds and then
turn on.
•
If the status of a device changes, the
details of the status change are stored
in a list at the controller. Press the
STATUS LIST button to bring up the
status list. The list can hold up to 100
changes.
2
Press the STATUS LIST button.
•
Alarm contents will be displayed in the
order in which their status was
received.
•
Note: The status list display will disappear if the STATUS
LIST button is pressed again while the status list is
being displayed.
•
The STATUS lamp will flash if there is an
unconfirmed status recording in the status list. The
STATUS lamp will be extinguished when the listed
statuses are confirmed.
•
A setting can be made from a connected device so
that the status list cannot be displayed in the menu
display section of the VSP-8000. Please refer to your
instruction manual for details.
Note: The status list can be set at some connected devices so that it cannot be displayed in the menu screen of the VSP-8000. For
more details, refer to the device instruction manuals.
Deleting the status list
1
Press the STATUS LIST button while holding down the
CLEAR button.
•
The status list deletion screen appears.
Note: Press the CLEAR button to abort the deletion and return to the
initial screen.
2
Press the ENTER button.
•
The status list is cleared and "NO CHANGE" is displayed.
•
Press the STATUS LIST button again to return to the initial
screen.
Note: If a status change occurs before the clock has been set for the
VSP-8000, then the display of the status change in the menu
screen will not have a time.
STATUS
(Flash → On)
1 Status number
2 Date and time of status change
3 Device where status change occurred
STATUS LIST
4 Status that changed
S 0 0 5 - - / - - - - : - -
44
Example status list
1
S 0 0 5 1 1 / 1 5 1 5 : 3 0
V R : 0 0 1
3
The higher the number, the newer the status change. The
status number can be changed with the + (or – ) buttons.
VR: Timelapse VCR, CM: Camera, DR: Digital video
recorder
+
CLEAR STATUS LIST
S T A T U S L I S T C L R ?
O K : E N T E R N O : C L R
ENTER
STATUS LIST
2
P L A Y
4
N O C H A N G E