Sanyo VSP-8000 Instruction Manual page 40

GROUP SETTING
Group assignment example
Controller 0
Controller 1
Controller 4
Example:
Assign the multiplexer (address 2), timelapse VCR (address 2), camera (address 2), and digital video
recorder (address 2) to group 2.
Assign 5 timelapse VCR (addresses 1 to 5) to group 3.
1
Press the GROUP button while holding down the
ENTER button.
•
Enters the setting mode.
2
Press the + (or – ) button to select group " 02" .
1 Enter "2" with the numeric keypad and press the ENTER button.
2 Select "VR" with the MODE button, enter "2" with the numeric
keypad, and press the ENTER button.
3 Select "CM" with the MODE button, enter "2" with the numeric
keypad, and press the ENTER button.
4 Select "DR" with the MODE button, enter "2" with the numeric
keypad, and press the ENTER button.
3
Press the + (or – ) button to select group " 03" .
1 Select "VR" with the MODE button, enter the address "1" with
the numeric keypad, and press the ENTER button.
2 Enter "0", "0", "2" with the numeric keypad and press the
ENTER button.
3 Using the same procedure, enter the addresses 3 to 5.
4
Press the CLEAR button twice.
•
The initial screen reappears.
5
When two or more VSP-8000s are connected together,
perform group checks with the other controllers. ( P14)
Group 1
VR MX
001 001
Group 2
MX VR
002 002
Group 3
VR VR
001 002
Group 15
MX CM
001 001
MX: Multiplexer, VR: Timelapse VCR, CM: Camera, DR: Digital video recorder
39
CM VR MX
001 003 003
Group
CM DR
assignment
002 002
VR VR VR
003 004 005
CM CM CM
002 003 016
+
ENTER GROUP
- +
2
ENTER
2
MODE ENTER
2
MODE ENTER
2
MODE ENTER
- +
1
ENTER
MODE
0 0 2
ENTER
G R : 0 1 S E T
M X : - -
G R : 0 2 S E T
M X : - -
G R : 0 2 S E T
M X : 0 0 2 C o m p l e t e
G R : 0 2 S E T
V R : 0 0 2 C o m p l e t e
G R : 0 2 S E T
C M : 0 0 2 C o m p l e t e
G R : 0 2 S E T
D R : 0 0 2 C o m p l e t e
G R : 0 3 S E T
C M : 0 0 2
G R : 0 3 S E T
V R : 0 0 1 C o m p l e t e
G R : 0 3 S E T
V R : 0 0 2 C o m p l e t e