Operate The Addresses Assigned To A Group - Sanyo VSP-8000 Instruction Manual

GROUP SETTING

[2] Operate the addresses assigned to a group

S A N Y O C o n t r o l l e r
1 6 : 2 0 : 1 5
G R : 0 1
M X : C o m m a n d r e a d y
V R : C o m m a n d r e d y
Operating procedure
1. Press the GROUP button.
•
Enter the group mode.
2. Using the numeric keypad, specify a group number.
3. Press the ENTER button to check the group number.
•
If there is no group registered at that number,
"unregistered" will appear.
4. Press the MODE button to select the devices for group
operation.
•
To operate all devices, select "ALL".
Note:
•
Even if you select "ALL" for camera operation, the
operations given in the Command list (page 30, 33)
cannot be performed. To perform these operations, first
assign a group.
•
Because the DIGITAL VIDEO RECORDER and
TIMELAPSE commands utilize the same keypad buttons,
selecting ALL groups will cause the system to override
the DIGITAL VIDEO RECORDER functions of the
keypad buttons, preventing them from controlling digital
video recorder.
5. Select the operating method.
•
For direct operation, use the command buttons. ( P21,
P26, P30, P35)
•
For calling up commands, use the call-up commands.
( P22, P28, P33, P37)
CLEAR
GROUP
1 2 3
4 5 6
7 8 9
0
ENTER
MODE
C M : C o m m a n d r e a d y
D R : C o m m a n d r e a d y
A L L : A L L
DIGITAL VIDEO RECODER
REW PLAY FF
ALARM PLAY ALARM
STILL REVERSE STOP
SEARCH FR/FI STOP
PLAY
TRACKING TRACKING
REC
V.LOCK V.LOCK
– +
REC REC STOP CHANNEL
REC/PLAY REC/PLAY
EJECT
SPEED SPEED
EXIT/OSD PLAY SPEED
TIMELAPSE
1 Group mode
G R : - -
2 Group No. entry
G R : - 1
3 Group selection
G R : 0 1
M X : C o m m a n d r e a d y
4 Device selection
G R : 0 1
V R : C o m m a n d r e a d y
5 Operation start
P21, P26, P30, P35
When using the command buttons
G R : 0 1 < P L A Y >
V R : C o m m a n d r e a d y
G R : 0 1
V R : C o m m a n d r e a d y
Checking the specified group
1. Press the GROUP button.
Assigned addresses (max. of three) are displayed.
•
Press the MODE button to select the device type.
•
If four or more addresses exist within the group, then
scroll with the + (or – ) button.
2. Press the GROUP button.
Return to the setting mode.
40
Checking the specified group
G R : 0 3 C H E C K
GROUP
V R : 0 0 1 , 0 0 2 , 0 0 3 ,
G R : 0 3 C H E C K
MODE
C M : 0 0 1 , 0 0 2 , 0 0 3 ,
G R : 0 3
GROUP
C M : C o m m a n d r e a d y
P22, P28, P33, P37
When using the call-up commands
G R : 0 1
FUNCTION
A U D I O / S E A R C H
– + G R : 0 1
P O W E R O F F
G R : 0 1 P W . O F F
ENTER
G R : 0 1
P O W E R O F F