Sanyo VSP-8000 Instruction Manual page 31

CAMERA OPERATION
Command button operation list
The in the table tells you the corresponding section below for reference.
VSP-8000 command button
ELS
BLC
AWC SET
IRIS –
IRIS +
IRIS – and IRIS +
AWC RESET
PAN
FOCUS F
FOCUS N
AUX
AF
ZOOM W
ZOOM T
0
MENU
Joystick lever (J)
Joystick lever (s)
Joystick lever (q)
Joystick lever (t)
ENTER
Dome camera command button operation list
VSP-8000 command button
TOUR
SEQ
ELS
1 – 9
Joystick lever (Right up)*
Joystick lever (Left up)*
Joystick lever (Right down)*
Joystick lever (Left down)*
* Speed of camera pan or tilt will be faster or slower depending on the angle at which the joystick lever is held.
** VCC-9300 only
Note: If the connected device does not have command functions, then "No OPE." will appear in the menu screen.
Turns electronic shutter on and off
Turns glare compensation on and off
Executes auto white balance adjustment
Closes the iris level
Opens the iris level
Returns iris setting to initial value
Deactivates the white balance lock
Carries out/cancels automatic panning
Adjusts the focus to distant objects using manual focus
Adjusts the focus to near objects using manual focus
Turns other functions (receiver unit functions) on/off
Adjusts the focus automatically at one touch
Sets electronic zoom to wide
Sets electronic zoom to telescopic
When electronic zoom is on, centers the screen during pan/tilt operations
Brings up the menu screen, or selects the menu screen
•
Changes set value at menu screen
•
Pans to left when electronic zoom is on
•
Changes set value at menu screen
•
Tilts upward when electronic zoom is on
•
Changes set value at menu screen
•
Pans to right when electronic zoom is on
•
Changes set value at menu screen
•
Tilts downward when electronic zoom is on
Enters item selected at menu screen
Turns TOUR mode on and off
Carries out/cancels sequential panning
Sets the electronic shutter
Moves the camera to the position corresponding to the preset memory
setting for the number entered
Pans and tilts to the top-right
Pans and tilts to the top-left
Pans and tilts to the bottom-right
Pans and tilts to the bottom-left
Operation
Operation
30
Menu screen
( A) CM:001 ELS
ON:+ OFF:-
( B) CM:001 BLC
ON:+ OFF:-
CM:001 <WB SET>
CM:001 <IRIS ->
CM:001 <IRIS +>
CM:001 <IRIS C>
CM:001 <WB RST>
( C) CM:001 PAN:off
ON:+ OFF:-
CM:001 <FOCS F>
CM:001 <FOCS N>
( D) CM:001 AU.ALL
CM:001 <ZOOM W>
CM:001 <CAMcon>**
CM:001 <ZOOM T>
CM:001 <CAMcon>**
CM:001 <0>
CM:001 <MENU>
CM:001 <LEFT>
CM:001 <CAMcon>**
CM:001 <UP>
CM:001 <CAMcon>**
CM:001 <RIGHT>
CM:001 <CAMcon>**
CM:001 <DOWN>
CM:001 <CAMcon>**
CM:001 <ENTER>
Menu screen
( C) CM:001 TOUR
ON:+ OFF:-
( C) CM:001
SEQ:on
ON:+ OFF:-
( E) CM:001 ELS 2000
ON:+ OFF:-
CM:001 No.---
( F) PRESET POSITION
CM:001 <UP&RGT>
CM:001 <CAMcon>**
CM:001 <UP&LFT>
CM:001 <CAMcon>**
CM:001 <DW&RGT>
CM:001 <CAMcon>**
CM:001 <DW&LFT>
CM:001 <CAMcon>**