[B] Operation Using The Call-Up Commands - Sanyo VSP-8000 Instruction Manual

MULTIPLEXER OPERATION

[B] Operation using the call-up commands

Use the procedure outlined below to operate the multiplexers.
S A N Y O C o n t r o l l e r
Operating procedure
1. Press the INDIVIDUAL button.
2. Press the MODE button to change the displayed device to
"MX".
3. Enter the address with the numeric keypad.
4. Press the ENTER button to check the address status.
•
The operating status of the multiplexer appears in the
menu screen.
Call-up command operation list
The in the table tells you the corresponding section below for
reference.
Call-up command
CLOCK ADJUST Sets the minutes and
seconds of the clock to 00
( A)
MENU RESET Returns the menu screen
settings to the initial values
POWER OFF Turns off multiplexer
POWER ON Turns on multiplexer
S.LOCK OFF * Deactivates the security lock MX:001 S.L.OFF
S.LOCK ON * Activates the security lock
ZOOM Zooms image in one screen
of monitor 1/main monitor.
* For models without a password type security lock function
Note: If the connected device does not have command
functions, then "No OPE." will appear in the menu screen.
CLEAR
INDIVIDUAL
1 5 : 3 0 : 3 0
MODE
1 2
4 5
7 8
0
ENTER
FUNCTION
–
ENTER
Operation Menu screen
MX:001 MENU RST
MX:001 PW.OFF
MX:001 PW.ON
MX:001 S.L.ON
MX:001 ZOOM
1 Device display
V R : - -
-
2 Device selection
M X : - -
-
3 Address entry
3
M X : - - 1
2 N D F L O O R
6
9
4 Address check
M X : 0 0 1 L : M U L T I
5 Call-up command
M X : 0 0 1
P O W E R O F F
6 Command selection
M X : 0 0 1
+
P O W E R O N
7 Operation execution
M X : 0 0 1 P W . O N
5. Press the FUNCTION button to bring up the commands.
•
The command name is displayed flashing.
6. Press the + (or – ) button to select the desired command.
•
For an explanation of the multiplexer call-up commands,
refer to the Call-up command operation list
7. Press the ENTER button to execute the command.
Operations
A: Sets the minutes and seconds of the clock to 00
Ex.: Set clock to 14:00
Works over the range from 13:30:00 to 14:29:59.
1. Press the + (or – ) button to select "CLOCK ADJUST".
2. Press the ENTER button.
M X : 0 0 1
3. Press the ENTER button again.
M X : 0 0 1
22
Multiplexer
M X : - -
-
V R : - -
-
C M : - -
-
D R : - -
-
Device title ( P13)
CLEAR
CLEAR
Call-up command
C L K A D J .
P R E S S : [ E N T E R ]
C L K A D J .
Timelapse VCR
Camera
Digital video
recorder