Sanyo VSP-8000 Instruction Manual page 32

CAMERA OPERATION
Operations
A: Turns electronic shutter on and off
1.
Press the ELS button.
C M : 0 0 1 E L S
O N : + O F F : -
2.
Press the + or – button to set "on" or "off".
B: Turns glare compensation on and
off
1.
Press the BLC button.
C M : 0 0 1 E L S
O N : + O F F : -
2.
Press the + or – button to set "on" or "off".
C M : 0 0 1 < B L C o n >
C M : 0 0 1 < B L C o f f >
C: Carries out/cancels automatic
panning
Turns TOUR mode on and off.
Carries out/cancels sequential
panning
1.
Press the PAN/TOUR/SEQ button.
C M : 0 0 1 P A N : o f f
O N : + O F F : -
C M : 0 0 1 T O U R
O N : + O F F : -
C M : 0 0 1 S E Q : o f f
O N : + O F F : -
2.
Press the + button.
Sequential panning starts.
C M : 0 0 1 < P A N o n >
C M : 0 0 1 < T O R o n >
C M : 0 0 1 < S E Q o n >
3.
Press the PAN/TOUR/SEQ button and
then press the – button.
Sequential panning stops.
D: Turns other functions on/off
The AUX button switches between
" AU.ALL" and " AU.– –" .
To switch all functions on/off
1.
Press the AUX button to display "AU.– – ".
C M : 0 0 1 A U . A L L
2.
Press the ENTER button.
3.
Press the + or – button to set "on" or "off".
C M : 0 0 1 A U . A L L
O N : + O F F : -
To switch a specific function on/off
1.
Press the AUX button to display "AU.– – ".
C M : 0 0 1 A U . - -
2.
Use the numeric keypad to enter a
function number.
C M : 0 0 1 A U . 0 1
3.
Press the ENTER button.
4.
Press the + or – button to set "on" or "off".
C M : 0 0 1 A U . 0 1 o f f
O N : + O F F : -
E: Sets the electronic shutter
Sets the shutter speed to one of four
speeds (1/60, 1/100, 1/500 or 1/2000).
If more than four speed settings are
available, the following display will
appear
•
Shutter speed of 1/50 or slower than 1/60:
SLOW
•
Shutter speed of 1/50 or 1/60: OFF
•
Shutter speed of 1/100 or 1/120: FL
(flickerless)
•
Shutter speed of 1/100 or faster than 1/120:
FAST
1.
Press the ELS button.
C M : 0 0 1 E L S 2 0 0 0
O N : + O F F : -
2.
Press the + button to set the shutter
speed.
C M : 0 0 1 < E L S o n >
•
If you press the – button, the setting
becomes 1/60 (off).
C M : 0 0 1 < E L S o f f >
31
F: Moves the camera to a preset
position
1.
Specify a position number with the
numeric keypad.
Example: 25 → [2][5]
C M : 0 0 1 N o . - 2 5
P R E S E T P O S I T I O N
2.
Press the ENTER button.
C M : 0 0 1 N o . - 2 5
P R E S E T P O S I T I O N