Sanyo VSP-8000 Instruction Manual page 27

TIMELAPSE VCR OPERATION
Command button operation list
The in the table tells you the corresponding section below for reference.
Note: Please note that the menu operation differs according to the timelapse VCR model.
Command button
REW f
PLAY c
FF e
REC a
REVERSE d
STOP b
STILL h
TRACKING V.LOCK –
TRACKING V.LOCK +
EJECT i
REC/PLAY SPEED l
REC/PLAY SPEED j
MENU
Joystick lever (q)
Joystick lever (t)
+
–
Joystick lever (J)
Joystick lever (s)
Operations
A: Performs recording
1.
Press REC button.
To prevent mistaken operations at the
controller, the confirmation screen
shown below appears.
V R : 0 0 1 R E C O K ?
O K : E N T E R N O : C L R
2.
Press ENTER button.
V R : 0 0 1 < R E C >
B: Adjusts tracking and reduces noise
1.
During playback, press the TRACKING
V.LOCK + button a number of times.
2.
If the video noise persists, adjust with
the TRACKING V.LOCK – button.
•
Rewinds the tape
•
Rewinds the tape during playback
•
Reverse advances by frame
•
Plays back the tape
•
Enables checking of recording while recording
•
Fast-forwards the tape
•
Fast-forwards the tape during playback
•
Advances by frame
Performs recording
Plays back tape in reverse
Stops tape
•
Still image during playback
•
Pause image during recording
•
Adjusts tracking and reduces noise
•
Adjust vertical synchronicity and reduces vertical wavering during
stills
•
Returns tracking to initial value
Ejects tape
Decreases menu screen settings and recording/playback speed
Increases menu screen settings and recording/playback speed
•
Brings up the menu screen, or selects the menu screen
•
When the main menu is displayed, cancels the menu screen and returns
to the monitor screen
•
Confirms the menu screen
•
Moves the cursor to the right in the menu screen, also moves date/time
screen the to right
•
Cancels confirmation of the menu screen
•
Returns display to previous menu
•
Moves the cursor downward in the menu screen (may not be applicable with
some devices), also moves display of date and time downward.
•
Moves the cursor downward in the menu screen (may not be applicable
on some models)
•
Edits set values
•
Moves the cursor upward in the menu screen (may not be applicable on
some models)
•
Edits set values
Has the same effect as moving the joystick lever down (may not be
applicable on some models)
Has the same effect as moving the joystick lever to the right (may not be
applicable on some models)
C: Adjust vertical synchronicity and
reduces vertical wavering during
stills
1.
While paused, press the TRACKING
V.LOCK + button a number of times.
2.
If the vertical wavering persists, adjust
with the TRACKING V.LOCK – button.
D: Returns tracking to initial value
Press the TRACKING V.LOCK + button
while holding down the TRACKING
V.LOCK – button.
V R : 0 0 1
Operation
< T R C T R >
26
Menu screen
VR:001 <REW>
VR:001 <RVW>
VR:001 <REW>
VR:001 <PLAY>
VR:001 <FF>
VR:001 <CUE>
VR:001 <FF>
( A)
VR:001 REC OK?
OK:ENTER NO:CLR
VR:001 <R.PLAY>
VR:001 <STOP>
VR:001 <STILL>
( B) VR:001 <TR UP>
( C)
VR:001 <TR DWN>
( D)
( E) VR:001 EJECT OK?
OK:ENTER NO:CLR
VR:001 <SPD DN>
VR:001 <SPD UP>
VR:001 <MENU>
VR:001 <RIGHT>
VR:001 <DOWN>
E: Ejects tape
1.
Press the EJECT button.
V R : 0 0 1 E J E C T O K ?
O K : E N T E R N O : C L R
2.
Press the ENTER button.
V R : 0 0 1 < E J E C T >