Sanyo VSP-8000 Instruction Manual page 36

DIGITAL VIDEO RECORDER OPERATION
Command button operation list
The in the table tells you the corresponding section below for reference.
VSP-8000 command
button
PLAY c
STOP b
STILL h
ALARM ù
û ALARM
CHANNEL
EXIT/OSD
REC a
REC STOP
SEARCH FR/FI
PLAY SPEED l
PLAY SPEED j
MENU
Operations
A: Specifies a channel while paused
1.
Press the CHANNEL button while
paused.
Enables channel setting mode and the
operation display of the jog/shuttle dial
will appear in the monitor screen.
D R : 0 0 1 < C H N E L >
2.
Set the channel with the joystick lever.
•
Jog: Switch channels by moving the
joystick lever up/down
•
Shuttle : Set the channel by moving
the joystick lever to the right
•
Playback
•
Starts recording check/Stops recording check
Stops playback
•
Still image during playback
•
Pause image during recording
Searches for and plays back the next alarm during playback
Searches for and plays back the previous alarm during playback
Specifies a channel while paused
•
Turns On Screen Display on and off or adjusts display position
•
Exits On Screen Display menu
Performs recording
Stops recording
•
Displays search setting menu during recording or still image
•
Switches frame/field display during playback
Decreases menu screen settings and playback speed
Increases menu screen settings and playback speed
Brings up the menu screen, or selects the menu screen
Operation
35
Menu screen
DR:001 <PLAY>
DR:001 <STOP>
DR:001 <STILL>
DR:001 <ALARMf>
DR:001 <ALARMr>
( A) DR:001 <CHNEL>
DR:001 <O.E>
DR:001 REC OK?
OK:ENTER NO:CLR
DR:001 R.STP OK?
OK:ENTER NO:CLR
DR:001 <SEARCH>
DR:001 <SPD DN>
DR:001 <SPD UP>
DR:001 <MENU>