Alarm List - Sanyo VSP-8000 Instruction Manual

ALARM LIST

ALARM lamp operation
1
If an alarm is triggered at a
multiplexer, timelapse VCR, or
camera, the ALARM lamp will
flash for five seconds and then
turn on.
•
If an alarm is triggered at a device, the
alarm contents are stored in a list at
the controller. Press the ALARM LIST
button to bring up the alarm list. The
list can hold up to 100 alarms.
2
Press the ALARM button.
•
Alarm contents will be displayed in the
order in which the alarms were
triggered.
•
Note: The alarm list display will disappear if the ALARM
LIST button is pressed again while the alarm list is
being displayed.
•
The ALARM lamp will flash if there is an unconfirmed
alarm recording in the alarm list. The ALARM lamp
will be extinguished when the listed alarms are
confirmed.
•
A setting can be made from a connected device so
that the alarm list cannot be displayed in the menu
display section of the VSP-8000. Please refer to
your instruction manual for details.
Deleting the alarm list
1
Press the ALARM LIST button while holding down the
CLEAR button.
•
The alarm list deletion screen appears.
Note: Press the CLEAR button to abort the deletion and return to the
initial screen.
2
Press the ENTER button.
•
The alarm list is cleared and "NO ALARM" is displayed.
•
Press the ALARM LIST button again to return to the original
screen.
Note: If an alarm occurs before the clock has been set for the
VSP-8000, then the display of the alarm in the menu screen will
not have a time.
ALARM
(Flash → On)
ALARM LIST
A 0 0 1 - - / - - - - : - -
Example alarm list
(For multiplexers)
(For timelapse VCR)
(For cameras)
1 Alarm number
The higher the number, the newer the alarm. The alarm
number can be changed with the + (or – ) buttons.
2 Date and time of alarm
3 Device where alarm occurred
4 Channel of alarm
5 Type of alarm
•
EA: external alarm
•
VL: Video loss
•
SA: Sensor alarm
6 Alarm recording start and end
The alarm recording start (IN) and end (OUT) are entered in
the alarm list as two different events.
•
IN: Alarm recording start
•
OUT: Alarm recording end
Note: Dome cameras are not equipped with an alarm function.
+
CLEAR ALARM LIST
ENTER
ALARM LIST
43
1 2
A 0 9 8 1 1 / 3 0 0 5 : 3 0
M X : 0 1 2 C H 1 6 E A
3 4
1 2
A 1 0 0 1 1 / 3 0 1 5 : 3 0
V R : 0 0 1 I N
3 6
1 2
A 0 9 7 1 1 / 3 0 0 3 : 0 0
C M : 0 0 1
3
A L A R M L I S T C L R ?
O K : E N T E R N O : C L R
N O A L A R M
5
E A
5