Set The Sampling Rate - Beurer PM 90 Operating Instructions Manual

Set the sampling rate

You can set the sampling rate to ensure optimum analysis in the
EasyFit software. By default, the heart rate monitor saves your train-
ing data every minute. For shorter distances, we recommend
to reduce the sampling rate (5 sec, 30 sec). For longer distances
such as hikes, you can increase the sampling rate to 120 sec.
The memory in your heart rate monitor is limited. This means that
different training periods are possible depending on the set sampling
rate. For example:
The maximum training period with a sampling rate of 5 sec is

around 2.8 hours
The maximum training period with a sampling rate of 120 sec is

around 65 hours
Please note that a training session can never be longer than
23:59:59 hours. The training session is stopped automatically at this
point.
Switch to the
menu
Limits
option / set
Units
option / set
LightMan
option / set
Sam Rate
option / set
(60 sec, 120 sec, 5 sec or
30 sec).
Setting
is displayed.
is displayed.
is displayed.
is displayed.
start / stop
Set the sampling rate
menu.
26