Watch Settings; Overview - Beurer PM 90 Operating Instructions Manual

Scale
been successfully connected. If the
scale has switched itself off auto-
matically in the meantime, then
switch them on again.
After the signal search is completed,
the monitor displays all existing
devices once more:
HR OK
Spd OK
Scale OK
The display
pears at the end of the search for
the devices, if no devices were con-
nected.
Back to the main display.
option / set
W
ATCH SETTINGS

Overview

In the menu you can:
Time
Set the time and the date.

Set the alarm clock.

With

tances can be displayed in the bottom line.
signals that the scale has
: Chest strap is connected
: Speedbox is connected
: Scales are connected
No Device found
, information on the speed/dis-
28
ap-