Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.) - Yamaha AVENTAGE RX-A550 Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press z (power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

• Default settings are underlined.
Item Function
(U.S.A. and Canada models only)
SP IMP.
Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia model only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.

Changing the speaker impedance setting (SP IMP.)

(U.S.A. and Canada models only)
CHARGE ENHANCER STEREO TUNED
OUT
ECO
SP IMP.••8¬MIN
Change the unit's speaker impedance settings depending on the impedance of the
speakers connected.
Settings
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit.
Select this option when you connect 8-ohm or higher speakers to the
8 Ω MIN
unit.
89
En
SLEEP MUTE
VOL.
ADAPTIVE DRC VIRTUAL
Page
89
90
90
90
90
91
91