Yamaha AVENTAGE RX-A550 Owner's Manual page 14

1 2 3 4 5 6 7 8 9 10
2.1-channel system
1
9
2
Setting the speaker impedance
(U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to "6 Ω MIN".
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press z (power).
z (power)
STRAIGHT
3
Check that "SP IMP." is displayed on the front display.
CHARGE ENHANCER STEREO TUNED
OUT 1 2
ECO
SP IMP.••8¬MIN
4
Press STRAIGHT to select "6 Ω MIN".
5
Press z (power) to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
14
En
PARTY SLEEP MUTE
ZONE ZONE
2 A 3 B
VOL.
ADAPTIVE DRC VIRTUAL