Changing The Combination Of Video/Audio Input Jacks - Yamaha AVENTAGE RX-A550 Owner's Manual

1 2 3 4 5 6 7 8 9 10
Composite video connection
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial or stereo pin cable). Choose a set of input jacks (on the unit) depending on the
audio output jacks available on your video device.
Output jacks on video device
Video Audio
Digital coaxial
Analog stereo
Composite video
Digital optical
AV 3–6 (VIDEO) jacks
VIDEO
COAXIAL
L
R
The unit (rear)
AV 3 (COAXIAL) jack or
AV 4–6 (AUDIO) jacks
• If you connect a video device to the unit via composite video connection, you need to connect your TV to
the MONITOR OUT (VIDEO) jack of the unit (p.19).
Input jacks on the unit
AV 3 (VIDEO + COAXIAL)
AV 4–6 (VIDEO + AUDIO)
You need to change the combination of
video/audio input jacks (p.21).
Video output
(composite video)
VIDEO
V V
Video device
C C
COAXIAL
L
L L
R
R R
Audio output
(digital coaxial or analog stereo)

Changing the combination of video/audio input jacks

If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Video Audio
Digital optical
HDMI Digital coaxial
Analog stereo
Component video Analog stereo
Composite video Digital optical
21
En
Input jacks on the unit
Video Audio
HDMI 1–6 AV 1 (OPTICAL)
HDMI 1–6 AV 2–3 (COAXIAL)
HDMI 1–6 AV 4–6 (AUDIO)
AV 1–2
(COMPONENT AV 4–6 (AUDIO)
VIDEO)
AV 3–6 (VIDEO) AV 1 (OPTICAL)