Function; Input Rename; Memory Guard - Yamaha AVENTAGE RX-A550 Owner's Manual

Function

Configures the functions that make the unit easier to use.
• Default settings are underlined.

Input Rename

Changes the input source name displayed on the front display. You can also select a
name from the presets or a name created by the Auto Rename function.
Input sources
HDMI 1–6, AV 1–6, USB, Bluetooth, AUX
Default
HDMI 1–6: Auto
Others: Manual (For USB, Bluetooth, AUX only "Manual" can be selected.)
Procedure
1
Use the cursor keys (q/w) to select an input source to be renamed.
2
Use the cursor keys (e/r) to select "Manual" and press ENTER.
• To select a name from the presets, after selecting "Manual", use the cursor keys (e/r) to select a preset name.
• When selecting "Auto", the unit creates a name automatically according to the connected device.
You can check a created name by pressing ENTER.
• During selecting "Auto", the created name is saved even after the device connection is terminated. To
reset to the default setting, switch the setting to "Manual" at once and then set it again to "Auto".
3
Press ENTER.
The edit screen is displayed.
Input Rename
H D M I
( ) [ ] { } < > * ! ? # % &
. , : ; _ | / \ $ ~ ^ ´ ' `
0 1 2 3 4 5 6 7 8 9 + - =
← A a →
B K S P S p a c e D E L
a b c d e f g h i j k l m
n o p q r s t u v w x y z
OK
CANCEL
CLEAR
4
Use the cursor keys and ENTER key to edit the name, and then select "OK" to
confirm the new name.
5
To change another input source name, repeat steps 1 to 4.
6
To exit from the menu, press SETUP.
Input Skip
Set which input source is skipped when operating the INPUT key.
You can select the desired input source quickly by skipping unnecessary input sources.
Input sources
HDMI 1–6, AV 1–6, TUNER, USB, NET, Bluetooth, AUX
Settings
Off Does not skip the selected input source.
On Skips the selected input source.
Dimmer
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
• The front display may become dark when "ECO Mode" (p.82) is set to "On".

Memory Guard

Prevents accidental changes to the settings.
Settings
Off Does not protect the settings.
On Protects the settings until "Off" is selected.
• When "Memory Guard" is set to "On", the lock icon (o) is displayed on the menu screen.
Memory Guard o
Memory Guard On
Back:RETURN
83
En
Icon