Test Tone - Yamaha AVENTAGE RX-A550 Owner's Manual

Equalizer
Adjusts the tone with an equalizer.
EQ Select
Selects the type of equalizer to be used.
Settings
Applies the parametric equalizer values obtained by the YPAO
PEQ
measurement (p.27).
Select this option when you want to adjust the equalizer manually.
GEQ
For details, see "Manual equalizer adjustment".
Off Does not use the equalizer.
• "PEQ" is available only when the YPAO has been performed (p.27).
Manual equalizer adjustment
1
Set "EQ Select" to "GEQ".
2
Use the cursor keys (q/w) to select "Channel" and the cursor keys (e/r) to
select the desired speaker channel.
3
Use the cursor keys (q/w) to select the desired band (frequency) and the
cursor keys (e/r) to adjust the gain.
Setting range
-6.0 dB to +6.0 dB
Equalizer
EQ Select GEQ
GEQ Edit
Channel Front L
63Hz
160Hz
400Hz
1kHz
2.5kHz
6.3kHz
16kHz
Back:RETURN
4
To exit from the menu, press SETUP.

Test Tone

Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Settings
Off Does not output test tones.
Outputs test tones automatically when you adjust the speaker balance
On
or equalizer.
77
En