Hdmi - Yamaha AVENTAGE RX-A550 Owner's Manual

HDMI

Configures the HDMI settings.
• Default settings are underlined.
Configuration
HDMI Control
Enables/disables HDMI Control (p.107).
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "Standby Sync", "ARC",
and "SCENE".
• To use HDMI control, you need to perform the HDMI Control link setup (p.107) after connecting HDMI
Control-compatible devices.
Audio Output
Selects a device to output audio.
• This setting is available only when "HDMI Control" is set to "Off".
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
Off Disables the audio output from the speakers.
On Enables the audio output from the speakers.
HDMI OUT (TV)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when
the unit is in standby mode. If this function is set to "On" or "Auto", you can use the
input selection keys (HDMI 1–6) to select an HDMI input even when the unit is in
standby mode (the standby indicator on the unit blinks).
Settings
(When "HDMI Control" is set to "Off")
Off
Does not output videos/audio to the TV.
Automatically selects whether to output videos/audio depending on
Auto
the status of the connected device.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI
Control" is set to "On". The unit's input source automatically switches to TV audio
when the TV input is switched to its built-in tuner.
Settings
AV 1–6
Default
AV4
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for
connecting an external device because the input will be used for TV audio input.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the
unit when "HDMI Control" is set to "On".
Settings
Off Does not set the unit to standby mode when the TV is turned off.
On Sets the unit to standby mode when the TV is turned off.
Sets the unit to standby mode when the TV is turned off only when the
Auto
unit is receiving TV audio or HDMI signals.
78
En