Appendix; Frequently Asked Questions - Yamaha AVENTAGE RX-A550 Owner's Manual

APPENDIX

Frequently asked questions

The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use YPAO to optimize
the speaker settings again (p.27). If you want to adjust the speaker settings manually,
use "Speaker" in the "Setup" menu (p.75).
We want to set limitations on the volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using "Max Volume" in the "Setup" menu to set the
maximum volume level for the unit in advance (p.81).
I want to fix the volume when turning on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use "Initial Volume" in the "Setup" menu to set the
volume to be applied when the receiver is turned on (p.81).
The volume varies depending on the input sources...
You can correct volume differences between input sources by utilizing "Input Trim" in
the "Option" menu (p.70).
HDMI Control does not work at all...
To use HDMI Control, you need to perform the HDMI Control link setup (p.107). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to change the input source name...
By default, input source names (such as "HDMI 1" and "AV 1") are displayed on the
front display when an input source is selected. If you want to rename them as you like,
use "Input Rename" (p.83) in the "Setup" menu. You can also select a name from the
presets (such as "Blu-ray" and "DVD").
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing "Memory Guard" in the "Setup" menu (p.83).
The unit's remote control is simultaneously controlling
another Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.90).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode...
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set "Standby Through" (p.78) in the "Setup" menu
to "On" or "Auto". You can also switch the input source using the remote control of the
unit when this function is enabled.
93
En