BALANCER GEARS AND OIL PUMP GEARS
CHECKING THE BALANCER DRIVE
1.Check:
Balancer drive gear 1
G
Balancer driven gear 2
G
Damage/wear → Replace the balancer drive
gear and balancer driven gear as a set.
Excessive noise during operation → Replace
the balancer drive gear and balancer driven
gear as a set.
INSTALLING THE BALANCER DRIVE GEAR
AND BALANCER DRIVEN GEAR
1.Install:
Pin
G
Spring
G
Balancer drive gear
G
(onto the buffer boss)
NOTE:
Align the punch mark a on the balancer drive
gear with the hole b to the buffer boss.
2.Install:
Balancer drive gear
G
Balancer driven gear
G
NOTE:
Align the punch mark a on the balancer drive
gear with the punch mark b on the balancer
driven gear.
4 - 49
ENG