Emergency Override; Pin Code Programming - Mongoose M80i User's Operation Manual

EMERGENCY OVERRIDE

If all remotes are lost or inoperable, the system can be disarmed by
entering your the unique 4 digit PIN code issued with this product.
KEEP THE CARD IN A SAFE PLACE – NOT IN THE VEHICLE !
Following is an example using PIN code 4525
The code is entered by turning the ignition ON or OFF in sequence with the dash mounted LED.
1) Ignition ON
2) Ignition OFF - LED will start flashing. Count the number of flashes for the first number.
3) Ignition ON
4) Ignition OFF - count the number of flashes.
5) Ignition ON - after 5 flashes (2
6) Ignition OFF - count the number of flashes.
7) Ignition ON - after 2 flashes (3
8) Ignition OFF - count the number of flashes.
9) Ignition ON - after 5 flashes (4
10) The system will now disarm and the vehicle can be started.
Note: If your PIN code contains a "0", this equals '10'.
Should you miss the LED flashes or enter a digit incorrectly, wait for 11 flashes and simply repeat
the procedure from step 1).
This system will always automatically immobilise the engine every time the ignition is turned off. This
override sequence will have to be used until the remotes are repaired or replaced.
– 4 DIGIT PIN CODED
- LED will light permanently to commence override.
st
- after 4 flashes (1
nd
rd
th
number of the example). The LED will light.
number).The LED will light.
number). The LED will light.
number).
17
EMERGENCY
4 DIGIT PIN CODE OVERRIDE
PIN CODE:
PLEASE KEEP THIS CARD IN A SAFE PLACE
BUT BE READILY AVAILABLE SHOULD YOU
NEED TO USE THE OVERRIDE PROCEDURE
DO NOT LOSE THIS CARD