Unit" To Choose The Weighing Units To Enable; A. Off" To Choose The Time Of Auto Off; Trn " To Choose Rs-232 Transmission Method; Rate" To Choose The Rs-232 Baud Rate: Default Is 2400 Baud - Adam Equipment ACB-600H Manual

8.3

"Unit" To choose the weighing units to enable.

Press the ENTER/select key to access the units functions.
Press the ENTER/select key to choose the units. To enable a unit select "ON", to
disable the unit choose "OFF". Press the LIGHT/increment key to change from ON to
OFF. Press ENTER/select to advance to the next unit. Press PCS/next to continue to
another function mode.
8.4

"A. OFF" To choose the time of AUTO OFF

Select the auto off time by pressing the ENTER/select key.
Press the LIGHT/increment key to choose the time of auto off, i.e. 2 or 5 or 8 minutes or
select "no" to disable auto off. Then press ENTER/select to return to weighing or
PCS/next key to continue to another function mode.
8.5

" trn " To choose RS-232 TRANSMISSION METHOD

Press the ENTER/select key to choose "trn"
Press the LIGHT/increment key to choose "stb" = print once when stable,
print once after ENTER/select key is pressed when stable,
(continuous output), or "CLOSE" = output disabled. Then press the ENTER/select key
or the PCS/next key to continue to next function.
8.6

"rAtE" To choose the RS-232 Baud Rate: default is 2400 baud

Select the Baud Rate by pressing the ENTER/select key.
Press the LIGHT/increment key to select the desired baud rate: 1200, 2400, 4800 or
9600. Then press ENTER/select to return to weighing or PCS/next key to continue to
another function mode. (Default of 2400)
© Adam Equipment Company 2000 11
"tb" =
"ser" = series