Power Supply - Adam Equipment ACB-600H Manual

6.0 POWER SUPPLY

Your scale is delivered complete with a mains power supply. However the ACB scales
can be operated from batteries if desired. The scale will not charge batteries and only
alkaline dry cells should be used.
If batteries are not used for an extended period of time they should be removed from the
scale.
Do not use the power supply at the same time as batteries are installed. Remove the
batteries first.
Power supplies:
1. 9V/300mA AC/DC adapter
2. 4 pcs "C" size dry cell batteries
Batteries may not have a long life due to the power consumption required by the scale.
Typical power consumption is:
1. Standby mode : 0.7mA
2. During operating (no backlight): about 40mA
3. During operating (with backlight) : 90 – 100mA
Low Battery:
When the battery symbol appears in the right corner of the display, the dry cell batteries
need changing.
© Adam Equipment Company 2000 8