Tracx" To Select The Zero Tracking Range - Adam Equipment ACB-600H Manual

8.11 "trACx" To select the zero tracking range

Press the LIGHT/increment key to select the zero tracking range from 0 – 5
0=1/3 division 1=2/3 division 2=1 division
3=4/3 division 4=5/3 division 5=2 divisions
Press the LIGHT/increment key to choose the range from 0 to 5. Then press the
ENTER key to confirm and return to normal weighing or press the PCS key to continue
to another function mode.
Note:
When the scale is in the function mode, if you press the ENTER/select key, it means the
selected setting is confirmed and the scale will return to weighing.
When the balance is in the function mode (any type of setting mode), if you press the
ZERO key, the scale will return to weighing without making a change.
© Adam Equipment Company 2000 13