Related Manuals for Adam Equipment ACB-600H
Summary of Contents for Adam Equipment ACB-600H
- Page 1 Adam Equipment ACB SERIES © ADAM EQUIPMENT CO. LTD. pn. 3426 rev. H, November 02 © Adam Equipment Company 2002...
- Page 2 Shielded interconnect cables must be employed with this equipment to insure compliance with the pertinent RF emission limits governing this device. Changes or modifications not expressly approved by Adam Equipment could void the user's authority to operate the equipment. © Adam Equipment Company 2002...
-
Page 3: Table Of Contents
To choose the Auto Zero recovery range ........12 8.10. “AC y” or “AC n” To enable the auto-average during counting mode12 8.11 “trACx” To select the zero tracking range ............13 9.0 SCALE SPECIFICATIONS..................14 WEIGHT CONVERSION....................15 APPENDIX PARAMETER SETTING MENU...............16 © Adam Equipment Company 2002... - Page 4 © Adam Equipment Company 2000...
-
Page 5: Technical Data
The ACB series of precision electronic scales offers a range of capacities from 150 grams to 3 kilograms. The ACB series now includes 2 models with high resolution,1:60,000. These are the ACB-600H and ACB-1200H. The balances are very simple to use and are applicable for general weighing. The user can also use the parts counting and percent weighing functions for special applications. -
Page 6: Installing The Breeze Shield
The breeze shield fits on top of the scale positioned by the ridges on the cover. DISPLAY DESCRIPTION The LCD display is described below. WEIGHT DISPLAY STABLE LOW BATTERY ZERO TARE UNITS OF WEIGHT © Adam Equipment Company 2000... -
Page 7: Keyboard Function
ZERO Set the initial zero on the display. LIGHT / increment Turn the backlight on or Increment parameter off. values during set-up. ENTER / select Confirmation key. Confirm setting during set- Print key. © Adam Equipment Company 2000... -
Page 8: Operation
The scale will count parts by weighing a preset number of samples and setting the display to show the number. Then, as more samples are added, the display will increase. If necessary, place a container on the scale and press TARE before beginning. © Adam Equipment Company 2000... -
Page 9: Sampling
The scale will memorise the previous data automatically so that you can continue to count parts or weigh in percentage. 2. The memory of sampling size data will be cleared automatically every time the MODE key is used to select parts counting or percent weighing. © Adam Equipment Company 2000... -
Page 10: Backlight Function
Scale is overloaded These messages may also be shown if the load cell protection is not removed, the pan is not installed correctly or the environment is not suitable. Contact Adam Equipment or your dealer for assistance. © Adam Equipment Company 2000... -
Page 11: Power Supply
2. During operating (no backlight): about 40mA 3. During operating (with backlight) : 90 – 100mA Low Battery: When the battery symbol appears in the right corner of the display, the dry cell batteries need changing. © Adam Equipment Company 2000... -
Page 12: Rs - 232 Interface
EX: +0.876g, when it is stable and net value as: ST,NT,+ 0.876 g <CR><LF> EX: -1,568lb, when it is unstable and net value as: US, NT,- 1.586 lb <CR><LF> EX: +15.24 tl.T, when it is stable and net value as: ST,NT,+15.24 tl.T <CR><LF> © Adam Equipment Company 2000... -
Page 13: Parameter Set-Up
Press the ENTER/select key to set the initial units. Please press the UNITS key to choose the unit. Then press the ENTER/select key to confirm and return to normal weighing or press the PCS/next key to continue to another function mode. © Adam Equipment Company 2000... -
Page 14: Unit" To Choose The Weighing Units To Enable
Select the Baud Rate by pressing the ENTER/select key. Press the LIGHT/increment key to select the desired baud rate: 1200, 2400, 4800 or 9600. Then press ENTER/select to return to weighing or PCS/next key to continue to another function mode. (Default of 2400) © Adam Equipment Company 2000... -
Page 15: Filxx" To Choose The Stable Range: Default Is Fil 05
Press the LIGHT/increment key to choose the enable (y) or disable (n). Then press the ENTER key to confirm and return to normal weighing or press the PCS key to continue to another function mode © Adam Equipment Company 2000... -
Page 16: Tracx" To Select The Zero Tracking Range
When the balance is in the function mode (any type of setting mode), if you press the ZERO key, the scale will return to weighing without making a change. © Adam Equipment Company 2000... -
Page 17: Scale Specifications
80 x 16 x 32 x tl.H 0.0002 0.0005 0.001 0.002 0.005 0.0005 0.001 12 x 25 x 51 x 120 x 250 x 51 x 102 x 0.0005 0.001 0.002 0.005 0.01 0.001 0.002 © Adam Equipment Company 2000... -
Page 18: Weight Conversion
1.555174 g 1 MM (MOMME, Japan) 3.749996 g 1 tl.J ( JEWELRY TAEL, Hong Kong) = 37.42900 g 1 tl.T (TAEL,Taiwan) 37.49995 g 1 tl.H (TAEL, Singapore) 37.799375 g 1 t (TOLA, India) 11.663804 g © Adam Equipment Company 2000... -
Page 19: Appendix Parameter Setting Menu
APPENDIX PARAMETER SETTING MENU © Adam Equipment Company 2000... - Page 20 ADAM EQUIPMENT is a global supplier with more than 30 years experience in the production and sale of electronic weighing equipment. Products are supplied and serviced from our company locations in the UK, USA and SOUTH AFRICA and distributed through a world wide dealer network.