3.
Remove the WLAN module (3) by pulling the module away from the slot at an angle.
NOTE:
into the WLAN module slot.
NOTE:
If the WLAN antenna cables are not connected to the terminals on the WLAN module, protective
sleeves should be installed on the antenna connectors, as shown in the following illustration.
Reverse this procedure to install the WLAN module.
Audio/USB board
Description
Audio/USB board (includes audio jack, cable, and USB port)
WLAN modules are designed with a notch (4) to prevent incorrect insertion of the WLAN module
Spare part number
768011-001
Audio/USB board
35