Memory Module - HP Pavilion x360 Maintenance And Service Manual

Memory module

Description
8-GB (PCL3, 12800, 1600-MHz)
4-GB (PCL3, 12800, 1600-MHz)
2-GB (PCL3, 12800, 1600-MHz)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
components:
a. Battery (see
b. WLAN module (see
c. Fan (see
d. Audio/USB board (see
e. Speakers (see
f. Display assembly (see
g. System board (see
Remove the memory module:
1. Turn the system board upside down with the front toward you.
2. Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
3. Remove the memory module (2) by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
Keyboard/top cover on page
Battery on page 31)
WLAN module on page
Fan on page 36)
Audio/USB board on page
Speakers on page 37)
Display assembly on page
System board on page
27), and then remove the following
34)
35)
39)
47)
Spare part number
693374-005
691740-005
691739-005
Memory module 51