Touchpad - HP Pavilion x360 Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit includes the TouchPad cable.
Description
TouchPad
Before removing the TouchPad, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Turn the keyboard/top cover upside down with the front toward you.
2. Remove the two Philllips PM1.9×2.4 broad head screws (1) that secure the TouchPad to the keyboard/
top cover.
NOTE:
keyboard/top cover.
3. Remove the TouchPad and cable (3) by releasing them from the top surface of the keyboard/top cover.
4. Remove the TouchPad.
Reverse this procedure to install the TouchPad.
30 Chapter 5 Removal and replacement procedures
When removing the TouchPad, make sure the cable is released through the opening (2) in the
Keyboard/top cover on page
Spare part number
783028-001
27).