Power Button Board - HP Pavilion x360 Maintenance And Service Manual

Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
6. Remove the audio/USB board (see
Remove the speakers:
1. Remove the two Phillips PM2.4×3.7 screws (1) that secure the speakers to the bottom cover.
2. Release the speakers cables from the retention clips (2) built into the bottom cover.
3. Remove the speakers (3).
Reverse this procedure to install the speakers.

Power button board

Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
38 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Battery on page 31).
Audio/USB board on page
27).
35).
Spare part number
768009-001