Warning Message - Philips 170C5 Service Manual

10 170C5 LCD
Go to cover page
Warning Message Table
Item Attention Signals
1 CANNOT DISPLAY
THIS VIDEO MODE,
CHANGE COMPUTER
DISPLAY
INPUT TO 1024X768
@ 60HZ
2 NO VIDEO INPUT
3 CHECK CABLE
CONNECTION
4 ENTERING SLEEP
MODE
5 WAITING FOR
AUTOMATIC
ADJUSTMENT
6 USE 1024 X 768 FOR
BEST RESULT
7 OSD MAIN CONTROLS
LOCKED
8 OSD MAIN CONTROLS
UNLOCKED
9 ATTENTION SIGNAL
ON
Display Time Condition
30 mins This warning appears when the input signal from your
computer is not in a standard video mode or is out of the
monitor' s scanning range. After 30 mins, monitor enters
sleeping mode.
30 mins This message appears when there is no signal input but with
cable while AC or DC while power on. After 30 mins, monitor
enters sleeping mode.
30 mins This message appears when a signal cable is disconnected
while monitor is working. After 30 mins, monitor enters
sleeping mode.
3 secs This message appears when monitor is about to enter power
saving mode.
till auto adjustment This message is displayed when the auto adjustment button
finished is pressed. It disappears when automatic adjustments are
completed.
On top of OSD The message will show up at the top of the OSD main menu
main menu in red color when the input resolution is not the 1024x768.
3 secs / or Till This message will appear 3 seconds to indicate the OSD
"OSD MAIN MAIN CONTROLS status when to lock or un-lock it by
CONTROLS pressing "MENU(OK)"button for more than 10 seconds
UNLOCKED" while there is video input from PC. This function provides the
appear alternative that user can lock all the OSD main control in
case user don' t want the FOS performance setting to be
changed, for instance, during commercial exhibition.
3 secs This message will appear 3 seconds to indicate the OSD
MAIN CONTROLS status when to un-lock it by pressing
"MENU(OK)" button for more than 10 seconds while there is
video input from PC.
3 secs This message will appear 3 seconds to indicate the attention
signals in ON or OFF status when to switch this function on
or off by pressing the AUTO button for more than 10
seconds while at no video input from PC.
Attention off
No
Yes
Show floating
menu
"ATTENTION
SIGNAL OFF"
Yes
Show floating
menu
"ATTENTION
SIGNAL OFF"
No
No
Yes
No function when
push 10 secs (If
OSD lock then
attention off, not
any message and
only attention on)
No function when
push 10 secs
Yes