Philips 170C5 Service Manual page 23

2. Press the Load hex then select the
170C5_Novatek_V200_20040623_5F79.hex
as shown in Fig. 8.
3. From the menu that appears, choose the "NT68F633(64K)" as
.
shown in Fig. 9
170C5_Novatek_V200_20040623_5F79.hex
Fig. 8
170C5_Novatek_V200_20040623_5F79.hex
Fig. 9
4 Press the AUTO to running program , the firmware be
updated as shown in Fig. 10~11.
Fig. 10
4 Press the file --> exit to end program , as shown in Fig. 12.
Fig. 11
Fig. 12
If there is a warring message coming as shown in Fig 13. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 13
Note
313810610079also can be used for firmware upgrade ,the operations
is the same as described above ,but you should connect the monitor
as below:
Monitor (A)
Connect to
Mains cord
Video cable
170C5 LCD 23
Go to cover page
PC
170C5 -Monitor (B)
D-Sub
AC POWER
DC 8-12V
+
To
Port
ToPC
313810610079