Philips 170C5 Service Manual page 13

Front view
Back view, remove the cover as Fig.2
Remove the base:
unscrew the screws as Fig.3
Remove the front cover,
unscrew the screws as Fig.4 and the open the
click as Fig,5
Fig.4
Fig.1
Fig.2
Fig.3
Open the clicks and then remove the back cover as Fig.6 and Fig.7
Remove the Matel frame board
- Remove the four screws and
- Disconnect D-SUB hexagonal screws as shown in Fig7
- Remove the matel frame board as shown in Fig.8
Remove the power and scaler board
unscrew the screws and disconnect the connector as shown in Fig.9
170C5 LCD 13
Go to cover page
Fig.5
Fig.6
Fig.7
Fig.8