Warning Message - Philips 170S5FG/00 Service Manual

Warning message table
Item Attention Signals
1 CANNOT DISPLAY
THIS VIDEO MODE,
CHANGE COMPUTER
DISPLAY
INPUT TO 1024X768
@ 60HZ
2 NO VIDEO INPUT
3 CHECK CABLE
CONNECTION
4 ENTERING SLEEP
MODE
5 WAITING FOR
AUTOMATIC
ADJUSTMENT
6 USE 1024 X 768 FOR
BEST RESULT
7 OSD MAIN
CONTROLS LOCKED
8 OSD MAIN
CONTROLS
UNLOCKED
9 ATTENTION SIGNAL
ON
ATTENTION SIGNAL
OFF
10 THIS IS 85HZ
OVERSCAN, CHANGE
COMPUTER DISPLAY
INPUT TO
1024X768@60HZ
11 the window of OSD
MAIN CONTROLS
12 the window of
BRIGHTNESS
13 SELECTED INPUT
(Not for NOT AVAILABLE
150S
project)
Warning Message Table
Display Time Condition
30 mins This warning appears when the input signal from your
computer is not in a standard video mode or is out of the
monitor' s scanning range. After 30 mins, monitor enters
sleeping mode.
30 mins This message appears when there is no signal input but with
cable while AC or DC while power on. After 30 mins, monitor
enters sleeping mode.
30 mins This message appears when a signal cable is disconnected
while monitor is working. After 30 mins, monitor enters
sleeping mode.
3 secs This message appears when monitor is about to enter power
saving mode.
till auto This message is displayed when the auto adjustment button
adjustment is pressed. It disappears when automatic adjustments are
finished completed.
On top of OSD The message will show up at the top of the OSD main menu
main menu in red color when the input resolution is not the 1024x768.
3 secs / or Till This message will appear 3 seconds to indicate the OSD
OSD MAIN MAIN CONTROLS status when to lock or un-lock it by
CONTROLS pressing MENU(OK) button for more than 10 seconds while
UNLOCKED there is video input from PC. This function provides the
appear alternative that user can lock all the OSD main control in
case user don' t want the FOS performance setting to be
changed, for instance, during commercial exhibition.
3 secs This message will appear 3 seconds to indicate the OSD
MAIN CONTROLS status when to un-lock it by pressing
MENU(OK) button for more than 10 seconds while there is
video input from PC.
3 secs This message will appear 3 seconds to indicate the attention
signals in ON or OFF status when to switch this function on or
off by pressing the AUTO button for more than 10 seconds
while at no video input from PC.
3 secs
10 mins This message will appear 5 seconds in every 60 seconds for
10 minutes when the input of PC video timing is at 85Hz
mode.
Remark: AUTO is still functional in this mode
60 secs This message will appear when the OK button is pressed.
60 secs This message will appear when the BRIGHTNESS button is
pressed.
5 secs When just one input (analog or digital), press input switch or
hot key, then after show this warning message 5 sec, return
to original input.
170S5 LCD 9
Go to cover page
Attention off
No
Yes
Show floating
menu
ATTENTION
SIGNAL OFF
Yes
Show floating
menu
ATTENTION
SIGNAL OFF
No
No
Yes
No function when
push 10 secs (If
OSD lock then
attention off, not
any message and
only attention on)
No function when
push 10 secs
Yes
No
Yes
Yes
TBD