Warning Message - Philips 170X7FB/00 Service Manual

Item Attention Signals
1 Can not display this
video mode, change
computer display input
to 1280x1024@60Hz
2 NO VIDEO INPUT
3 CHECK CABLE
CONNECTION
4 Enter sleep mode
5 Waiting for automatic
adjustment
6 Use 1280x1024 for best
result
7 OSD main controls
locked

Warning message

Display Time Condition
30 mins This warning appears when the
input signal from your computer
is not in a standard video mode
or is out of the monitor s
scanning range. After 30 mins,
monitor enters sleeping mode.
30.mins This message appears when
there is no signal input but with
cable while AC or DC power on.
After 30 mins, monitor enters
sleeping mode
30 mins This message appears when a
signal cable is disconnected
while monitor is working. After
30 mins, monitor enters sleeping
mode.
3secs This message appears when
monitor is about to enter power
saving mode
Till automatic This message is displayed when
adjustment auto adjustment button is
finished pressed. It disappears when
auto adjustments are completed
On top of This message will show up at
OSD main the top of the OSD main menu in
menu red color when the input
resolution is not the 1280x1024
3secs/or till This message will appear 3
OSD main seconds to indicate the OSD
controls MAIN CONTROLS status when
unlocked to lock or un-lock it by pressing
appear MENU(OK) button for more
than 10 seconds while there is
video input from PC. This
function provides the alternative
that user can lock all the OSD
main control in case user don' t
want the FOS performance
setting to be changed, for
instance, during commercial
exhibition.
19
190X7&170X7 LCD
Go to cover page
Attention off