Philips 170C5 Service Manual page 6

6
Go to cover page
Connect the monitor to PC as followa:
Remove the cover
Plug the power cord into monitor firmly
Note: If you use an Apple Macintosh, you need to connect the
special Mac adapter to one
Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your computer.
(c) Plug the power cord of your computer and your monitor into a nearby outlet.
(d) Turn on your computer and monitor. If the monitor displays an image, installation is complete.