PC
DC Power
8-12 V
Fig. 4
Printer
Port
Method 1: Start on DDC program
1=Power connector
2=D-SUB connector
+
2
1
To
Monitor
To PC
TO VIDEO CARD
Fig. 5
3. At the submenu, type the letter of your computer's hard disk drive
followed by :EDID45 (for example, C:\EDID45, as shown in Fig. 6).
5
OK
4. Click
button. The main menu appears (as shown in Fig. 7).
This is for initialize alignment box.
Note 1: If the connection is improper, you will see the following error
message (as shown in Fig. 8) before entering the main menu.
Meanwhile, the (read EDID) function will be disable. At this
time,
please make sure all cables are connected correctly and
1
170C5 LCD
17
Go to cover page
Fig. 6
Fig. 7
Fig. 8
Fig. 9