Philips 170C5 Service Manual page 22

22 170C5 LCD
Go to cover page
Configuration and procedure
"Easywriter " The software
is provided by Novatek to upgrade the
firmware of CPU.
It is a windows-based program, which cannot be run in MS-DOS.
DDC2BI_ISP TOOL (3138 106 10396)
"Parallel Port of PC" and "15 pin-D-SUB connector of Monitor".
System and equipment requirements
1. An i486 (or above) personal computer or compatible.
2. Microsoft operation system Windows 95/98/2000/XP.
ISP Software " Easywrite "
3.
DDC2BI_ISP TOOL (3138 106 10396)
4.
D-SUB to monitor
. DDC2BI_ISP TOOL
5 Connect
in Fig. 2.
170C5 -Monitor (B)
D-Sub
Connect to Mains
cord at this moment.
Fig.2
ISP box
6. Install and setup the Easywriter program
Step 1 : Make a folder in your PC as shown in Fig. 3.
For example : C:\170C5
Step 2 : Copy ISP Software Easywriter
as shown in Fig.3.
Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3.
Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the
Application as Fig. 4.
170S5
170C5
is for the interface between
as shown in Fig. 1
Parallel Port to Print Port in PC
Fig. 1
and Mains cord to Monitor as shown
PC
Monitor (A)
Connect to
Mains cord
Video cable
.zip into your folder
2.09
Fig. 4
Step 5 :Copy the V200.hex to C:\170C5 as shown in Fig. 5 .
170S5
Fig. 5
Update the firmware
1. Double click the Easywriter.exe icon in desktop then appears
window as shown in Fig.7 .
Fig. 6
Fig. 7
9