Handling The Data Cartridge - Fujitsu PRIMERGY LTO2 User Manual

3.2

Handling the Data Cartridge

This section describes the points to note when handling the data cartridge used for this product.
Follow the notes below when handling the data cartridge.
• Keep the data cartridge clean.
• Check the following points before using the data cartridge.
- There is no damage to or cracks in the data cartridge.
- The label is correctly attached to the data cartridge.
• Do not insert a damaged data cartridge into this product.
• Do not open the data cartridge to take the tape out.
• Do not directly touch the tape.
• Do not expose the data cartridge to direct sunlight or place it in a humid place.
• Do not leave the data cartridge near a strong magnetic field (e.g. near a display device or speaker).
• Do not use a data cartridge that has had a strong shock such as being dropped or falling.
3.2.1 Setting the Data Cartridge Label
A label to be attached to the data cartridge is provided with the data cartridge. Attach the label at the
location shown in the following figure. Write the starting date of the data cartridge use to specify the
expiration date.
Be sure to use the provided label.
Do not attach the label to a place other than the specified place.
60
Area for the label to be attached
Starting date: Oct 31 2005
<Example of the label>