Fujitsu PRIMERGY LTO2 User Manual page 68

Phenomenon
The cartridge is not
ejected.
ACTIVITY LED turns
off and FAULT LED is
blinking (Unrecoverable
error).
Both ACTIVITY LED
and FAULT LED are
blinking (Media error).
68
Troubleshooting method
• Press the eject button. It may take several minutes to rewind the tape.
Wait if the ACTIVITY LED is blinking.
• Eject from the backup software. Eject using the eject button is set to
be disabled depending on the backup software.
• Shutdown and restart the server. Then, press the eject button (Data
may not be recorded correctly when the power on/off).
If possible, shutdown the server and restart.
• Check that the cartridge is correct.
• Check that the write-protect switch of the cartridge is set at the cor-
rect position (either write inhibit or write enable).
• Check that there is no damage to the cartridge.
• Perform cleaning and use a new cartridge.